| plan 9 kernel history: overview | file list | diff list |
1991/1011/power/clock.c (diff list | history)
| power/clock.c on 1990/0227 | ||
| 1990/0227 | #include "u.h" #include "lib.h" #include "mem.h" #include "dat.h" #include "fns.h" #include "io.h" #include "ureg.h" void delay(int ms) { ulong t, *p; int i; ms *= 7000; /* experimentally determined */ for(i=0; i<ms; i++) ; } /* * AMD 82C54 timer * * ctr2 is clocked at 3.6864 MHz. * ctr2 output clocks ctr0 and ctr1. * ctr0 drives INTR2. ctr1 drives INTR4. * To get 100Hz, 36864==9*4096=36*1024 so clock ctr2 every 1024 and ctr0 every 36. */ struct Timer{ uchar cnt0, junk0[3]; uchar cnt1, junk1[3]; uchar cnt2, junk2[3]; uchar ctl, junk3[3]; }; | |
| 1990/0731 | ||
| 1990/0227 | #define TIME0 (36*MS2HZ/10) | |
| 1990/0731 | #define TIME1 0xFFFFFFFF /* profiling disabled */ | |
| 1990/0227 | #define TIME2 1024 #define CTR(x) ((x)<<6) /* which counter x */ #define SET16 0x30 /* lsbyte then msbyte */ #define MODE2 0x04 /* interval timer */ | |
| 1990/0731 | ||
| 1990/0227 | void clockinit(void) { Timer *t; int i; t = TIMERREG; t->ctl = CTR(2)|SET16|MODE2; t->cnt2 = TIME2&0xFF; t->cnt2 = (TIME2>>8)&0xFF; t->ctl = CTR(1)|SET16|MODE2; t->cnt1 = TIME1&0xFF; t->cnt1 = (TIME1>>8)&0xFF; t->ctl = CTR(0)|SET16|MODE2; t->cnt0 = TIME0; t->cnt0 = (TIME0>>8)&0xFF; i = *CLRTIM0; | |
| 1990/1214 | USED(i); | |
| 1990/0227 | i = *CLRTIM1; | |
| 1990/1214 | USED(i); | |
| 1990/0227 | m->ticks = 0; } | |
| 1990/0731 | ||
| 1990/0227 | void | |
| 1991/0209 | clock(Ureg *ur) | |
| 1990/0227 | { | |
| 1990/1211 | int i; | |
| 1990/0227 | Proc *p; | |
| 1991/0209 | if(ur->cause & INTR2){ | |
| 1990/0227 | i = *CLRTIM0; | |
| 1990/1214 | USED(i); | |
| 1990/0227 | m->ticks++; if(m->machno == 0){ p = m->proc; if(p) p->time[p->insyscall]++; for(i=1; i<conf.nmach; i++){ if(active.machs & (1<<i)){ p = MACHP(i)->proc; | |
| 1991/0209 | if(p) | |
| 1990/0227 | p->time[p->insyscall]++; } } } | |
| 1991/0607 | duartslave(); | |
| 1990/0227 | if(active.exiting && active.machs&(1<<m->machno)){ print("someone's exiting\n"); exit(); } | |
| 1990/1211 | checkalarms(); | |
| 1991/1011 | kproftimer(ur->pc); | |
| 1991/0215 | if(u && (ur->status&IEP) && u->p && u->p->state==Running){ | |
| 1991/0614 | if(anyready()){ if(u->p->hasspin) u->p->hasspin = 0; /* just in case */ else sched(); } | |
| 1991/0710 | if(ur->status & KUP){ (*(ulong*)(USTKTOP-BY2WD)) += TK2MS(1); /* profiling clock */ if(u->nnote) notify(ur); } | |
| 1991/0209 | } | |
| 1990/0227 | return; } | |
| 1991/0209 | if(ur->cause & INTR4){ | |
| 1990/0731 | extern ulong start; | |
| 1990/0227 | i = *CLRTIM1; | |
| 1990/1214 | USED(i); | |
| 1990/0227 | return; } } | |