1994/1118/pc/ns16552.h (diff list | history)

pc/ns16552.h on 1994/0902
1994/0902		/* * PC specific code for the ns16552. It includes support for the 2 built * in uarts plus up to 5 MP-008 8 uart ISA cards. */ enum { Maxcard= 5, /* max serial cards */ UartFREQ= 1843200, Serial= 0, Modem= 1, }; #define uartwrreg(u,r,v) outb((u)->port + r, (u)->sticky[r] | (v)) #define uartrdreg(u,r) inb((u)->port + r)
1994/1108		void ns16552setup(ulong, ulong, char*);
1994/0902		/* * definition of an optional serial card */ typedef struct Scard { ISAConf; /* card configuration */ int first; /* number of first port */ } Scard; static Scard *scard[Maxcard]; /* configs for the serial card */ /* power management currently only makes sense on the AT&T safari */ static void uartpower(int dev, int onoff) { switch(dev){ case Modem: if(modem(onoff) < 0) print("can't turn %s modem speaker\n", onoff?"on":"off"); break; case Serial: if(serial(onoff) < 0) print("can't turn %s serial port power\n", onoff?"on":"off"); break; } } /* * handle an interrupt to a single uart */ static void ns16552intrx(Ureg *ur, void *arg) { USED(ur); ns16552intr((ulong)arg); } /* * interrupts from the multiport card, MP-008. A polling port * tells which of 8 devices interrupted. */ static void mp008intr(Ureg *ur, void *arg) { int i, loops; uchar n; Scard *mp; USED(ur); mp = arg;
1994/1006		for(loops = 0; loops < 1024; loops++){
1994/0902		n = ~inb(mp->mem); if(n == 0) return; for(i = 0; n; i++){ if(n & 1)
1994/1006		ns16552intrx(ur, (void*)(mp->first+i));
1994/0902		n >>= 1; } } } /* * install the uarts (called by reset) */
1994/1007		void
1994/0902		ns16552install(void) {
1994/1118		int i, j, port, nscard;
1994/1007		char *p;
1994/0902		Scard *sc;
1994/1108		char name[NAMELEN];
1994/1007		static int already;
1994/0902
1994/1007		if(already) return; already = 1;
1994/0902		/* first two ports are always there and always the normal frequency */
1994/1108		ns16552setup(0x3F8, UartFREQ, "eia0");
1994/0902		setvec(Uart0vec, ns16552intrx, (void*)0);
1994/1108		ns16552setup(0x2F8, UartFREQ, "eia1");
1994/0902		setvec(Uart1vec, ns16552intrx, (void*)1);
1994/1007		/* set up a serial console */ p = getconf("console"); if(p) ns16552special(atoi(p), 9600, &kbdq, &printq, kbdcr2nl);
1994/0902		/* the rest come out of plan9.ini */
1994/1118		nscard = 0;
1994/0902		for(i = 0; i < Maxcard; i++){
1994/1118		sc = scard[nscard] = xalloc(sizeof(Scard));
1994/0902		if(isaconfig("serial", i, sc) == 0){ xfree(sc);
1994/1118		scard[nscard] = 0; continue;
1994/0902		} if(strcmp(sc->type, "MP008") == 0 || strcmp(sc->type, "mp008") == 0){ /* * port gives base port address for uarts * irq is interrupt * mem is the polling port * size is the number of serial ports on the same polling port * freq is the baud rate generator frequency */ if(sc->size == 0) sc->size = 8; if(sc->freq == 0) sc->freq = UartFREQ; sc->first = nuart; setvec(Int0vec+sc->irq, mp008intr, sc); port = sc->port; for(j=0; j < sc->size; j++){
1994/1118		sprint(name, "eia%d%2.2d", nscard, j);
1994/1108		ns16552setup(port, sc->freq, name);
1994/0902		port += 8; }
1994/1106		} else if(strcmp(sc->type, "com") == 0 || strcmp(sc->type, "COM") == 0){
1994/0902		/* * port gives base port address for the uart * irq is interrupt * freq is the baud rate generator frequency */
1994/1106		if(sc->freq == 0) sc->freq = UartFREQ;
1994/1118		sprint(name, "eia%d00", nscard);
1994/1108		ns16552setup(sc->port, sc->freq, name);
1994/0902		setvec(Int0vec+sc->irq, ns16552intrx, (void*)(nuart-1)); }
1994/1118		nscard++;
1994/0902		} } int iprint(char *fmt, ...) { char buf[PRINTSIZE]; int n; n = doprint(buf, buf+sizeof(buf), fmt, (&fmt+1)) - buf; screenputs(buf, n); return n; }